Regular furnace maintenance can help keep your heating system operating reliably when you need it most.
Any Season Heating & Cooling provides professional furnace maintenance and furnace inspection in Des Plaines, IL, and the surrounding northwest suburbs. We maintain and inspect gas furnaces, electric furnaces, and residential heat pump systems.
During a maintenance visit, we evaluate the condition and operation of the heating system, inspect applicable components, check for visible or operating concerns, and identify problems that may require additional attention.
Our goal is simple: help keep your heating equipment operating safely, reliably, and efficiently throughout the Illinois heating season.
Need annual furnace maintenance? Call or text Any Season Heating & Cooling at (847) 766-9654 to schedule service.
Professional Furnace Maintenance in Des Plaines, IL
Your furnace may operate for hundreds of hours during a typical Chicago-area heating season.
Dust, normal wear, electrical connections, airflow restrictions, ignition components, controls, and other operating conditions can affect the performance and reliability of heating equipment over time.
Regular maintenance provides an opportunity to inspect the system before a small concern becomes an unexpected heating problem.
Depending on the furnace type and system configuration, our maintenance service may include inspection and testing of applicable heating components, controls, electrical connections, airflow, thermostat operation, and system performance.
If we discover a problem that requires repair rather than routine maintenance, we explain what we found and discuss the available options.
What Is Included in a Furnace Maintenance & Inspection?
Every heating system is different, so the exact maintenance procedure depends on the furnace type, equipment design, age, condition, and installation.
A typical furnace maintenance and inspection may include applicable items such as:
- Inspecting the general condition of the furnace
- Checking thermostat operation
- Checking the furnace heating cycle
- Inspecting electrical connections and components
- Checking furnace controls and safety devices
- Inspecting the blower and airflow
- Checking the air filter and filter condition
- Inspecting accessible wiring
- Checking ignition operation on applicable gas furnaces
- Inspecting flame-sensing components where applicable
- Checking burner operation on applicable equipment
- Inspecting the venting system where applicable
- Checking inducer operation on applicable furnaces
- Inspecting condensate components on applicable high-efficiency furnaces
- Checking temperature and system operation as appropriate
- Listening for unusual operating noises
- Looking for visible signs of wear, overheating, corrosion, leakage, or deterioration
- Reviewing system operation for conditions that may require additional diagnosis or repair
Maintenance is not simply changing an air filter. A professional furnace inspection evaluates the operation and condition of the heating equipment as a system.
Furnace Inspection
A furnace inspection is an important part of preventive heating maintenance.
The purpose is to evaluate the equipment and look for conditions that may affect operation, reliability, efficiency, or safety.
A furnace can sometimes continue operating even when a component is beginning to deteriorate. Identifying an abnormal condition during maintenance may provide an opportunity to address it before the furnace stops working during cold weather.
An inspection may also reveal airflow restrictions, abnormal furnace cycling, ignition issues, electrical concerns, venting problems, unusual noises, deteriorated components, or other conditions that deserve attention.
If an inspection identifies a problem requiring repair, we will explain the concern before recommending additional work.
Gas Furnace Maintenance & Inspection
Gas furnaces use a sequence of electrical, mechanical, combustion, and safety components to provide heat.
Regular gas furnace maintenance allows these components and the overall heating cycle to be inspected before the peak heating season.
Depending on the furnace, inspection and maintenance may involve applicable components such as:
- Burners
- Ignition system
- Hot surface igniter
- Flame sensor
- Gas controls
- Pressure switches
- Inducer motor
- Blower motor
- Control board
- Limit and safety controls
- Electrical connections
- Thermostat
- Venting system
- Condensate drainage on applicable high-efficiency furnaces
- Air filter and airflow
If the furnace shows signs of malfunction during maintenance, additional diagnostic or repair work may be recommended.
Electric Furnace Maintenance & Inspection
Any Season Heating & Cooling also provides electric furnace maintenance and inspection.
Electric furnaces do not use gas combustion, but they still contain electrical heating and control components that should operate correctly.
Depending on the equipment, electric furnace maintenance may include inspection of applicable:
- Heating elements
- Sequencers
- Relays and contactors
- Blower components
- Electrical connections
- Control board
- Transformer
- Thermostat
- Limit and safety controls
- Low-voltage control circuits
- Air filter
- Airflow
- General system operation
Electric heating equipment should be inspected by someone familiar with electrical HVAC systems because the equipment can contain high-voltage components.
Heat Pump Maintenance
We also provide heat pump maintenance for residential HVAC systems.
Unlike a furnace that primarily operates during the heating season, many heat pumps provide both heating and cooling. That means the system can operate throughout much of the year.
Heat pump maintenance may involve checking applicable indoor and outdoor equipment, electrical components, controls, airflow, coil condition, drainage, system operation, and other components related to the particular equipment.
If your home uses a heat pump with auxiliary or backup heating, those components may also need to be evaluated as part of the heating system.
Contact us if you are unsure whether your home has a conventional furnace, heat pump, or combination HVAC system.
Why Annual Furnace Maintenance Matters
Help Reduce Unexpected Furnace Breakdowns
Maintenance cannot guarantee that a component will never fail, but routine inspection can identify some developing problems before they cause a complete heating-system shutdown.
This can be especially valuable before the coldest part of an Illinois winter.
Maintain Proper System Operation
A furnace should complete its heating cycle correctly and respond properly to thermostat demand.
Maintenance gives us an opportunity to observe how the equipment operates and identify abnormal conditions.
Check Airflow
Restricted airflow can affect comfort and furnace operation.
The filter, blower, duct system, and other airflow conditions can influence how effectively heated air moves through the home.
Identify Wear and Developing Problems
Electrical components, motors, controls, ignition components, and other furnace parts can deteriorate over time.
An inspection may identify visible or operational warning signs before a larger problem develops.
Support Energy-Efficient Operation
A furnace in poor condition or operating with airflow or control problems may not perform as intended.
Routine maintenance helps ensure that the system is operating appropriately for its current condition.
Help Extend Equipment Service Life
No maintenance program can guarantee how long a furnace will last, but taking care of HVAC equipment and correcting problems when they develop can help avoid unnecessary stress and deterioration.
When Should I Schedule Furnace Maintenance?
For many homeowners, scheduling furnace maintenance once a year is a practical approach.
A good time is before or near the beginning of the heating season, so the furnace can be inspected before it is needed continuously during colder weather.
However, maintenance can still be useful later in the season if it was not completed earlier.
You may especially want to schedule a furnace inspection if:
- The furnace has not been serviced recently
- You recently purchased the home and do not know the maintenance history
- The furnace is making new or unusual noises
- Heating performance has changed
- The system seems to cycle differently than before
- You want the furnace checked before winter
- The equipment is older
- You want an HVAC professional to evaluate the system’s general condition
If your furnace is already malfunctioning or has stopped heating, you may need furnace repair rather than routine maintenance.
Furnace Maintenance vs. Furnace Repair
Maintenance and repair serve different purposes.
Furnace maintenance is a preventive service performed when the system is generally operating. The purpose is to inspect the equipment, evaluate operation, perform applicable maintenance, and identify developing concerns.
Furnace repair is a corrective service performed when the equipment has a known problem or is not operating properly.
For example, if your furnace is operating normally and you want it inspected before winter, schedule maintenance.
If your furnace will not start, will not ignite, is blowing cold air, repeatedly shuts down, trips a breaker, or is otherwise malfunctioning, visit our Furnace Repair page or call us for service.
Do You Need Furnace Maintenance or Replacement?
Regular maintenance can help care for an existing furnace, but maintenance cannot reverse major equipment deterioration or make an unreliable furnace new again.
If an inspection reveals a significant problem with an older heating system, it may be reasonable to compare the cost and value of repair with replacement.
Factors to consider can include:
- Overall furnace condition
- Equipment age
- Repair history
- Reliability
- Safety
- Efficiency
- Cost of necessary repairs
- Availability of replacement parts
- Comfort performance
- Plans for replacing other HVAC equipment
If replacement becomes the more practical option, Any Season Heating & Cooling provides professional Furnace Installation & Replacement services and can discuss appropriate equipment options.
Furnace Maintenance for All Major Brands
Any Season Heating & Cooling maintains and services all major residential furnace brands.
Our service is not limited to one manufacturer.
We work with equipment from major brands including:
- Trane
- American Standard
- Carrier
- Bryant
- Lennox
- Goodman
- Amana
- Rheem
- Ruud
- York
- Coleman
- Payne
- Heil
- Tempstar
- Armstrong Air
- Ducane
- AirEase
- Comfortmaker
- Day & Night
- KeepRite
If your furnace brand is not listed, contact us. We service most residential heating equipment.
Signs Your Furnace May Need More Than Routine Maintenance
Sometimes a homeowner schedules maintenance and the system turns out to have a problem requiring diagnosis or repair.
Contact us for furnace service if you notice:
- Furnace will not start
- Furnace will not ignite
- Little or no heat
- Cold air coming from vents during a heating call
- Frequent furnace cycling
- Unusual banging, grinding, squealing, humming, or rattling
- Blower does not operate correctly
- Circuit breaker repeatedly trips
- Furnace displays recurring fault codes
- Unusual burning or electrical odors
- Significant changes in heating performance
These symptoms may require troubleshooting rather than a standard maintenance visit.
If you smell gas, suspect a gas leak, see smoke, have a carbon monoxide alarm, or believe there is an immediate safety hazard, leave the affected area and contact the appropriate emergency or utility service first.
Furnace Maintenance Near Me — Des Plaines & Northwest Suburbs
Any Season Heating & Cooling is based in Des Plaines, Illinois 60016 and provides furnace maintenance and inspection throughout Des Plaines and surrounding northwest suburban communities.
Our primary service area includes:
Des Plaines, IL 60016 & 60018 • Arlington Heights, IL 60004 • Buffalo Grove, IL 60089 • Elk Grove Village, IL 60007 • Glenview, IL 60025 • Mount Prospect, IL 60056 • Niles, IL 60714 • Norridge, IL 60706 • Palatine, IL 60067 • Park Ridge, IL 60068 • Prospect Heights, IL 60070 • Rosemont, IL 60018 • Wheeling, IL 60090
We also provide HVAC service in nearby communities within our normal service area.
If you are searching for furnace maintenance near me or a furnace inspection near me in the Des Plaines area, call or text (847) 766-9654 to schedule service.
Why Choose Any Season Heating & Cooling?
Any Season Heating & Cooling is a local HVAC company based in Des Plaines and serving homeowners throughout the surrounding northwest suburbs.
Homeowners call us for:
- Professional furnace maintenance
- Furnace inspections
- Gas furnace maintenance
- Electric furnace maintenance
- Heat pump maintenance
- Service for all major furnace brands
- Furnace troubleshooting and repair
- Furnace installation and replacement
- Local residential HVAC service
- 24/7 availability for heating emergencies
We believe maintenance should provide useful information about the condition and operation of your heating system—not simply be a checklist completed as quickly as possible.
Frequently Asked Questions About Furnace Maintenance
How often should I have my furnace maintained?
For many residential heating systems, annual maintenance is a practical schedule. Equipment requirements can vary, so homeowners should also review the maintenance recommendations provided by the equipment manufacturer.
What is the difference between furnace maintenance and a furnace inspection?
They overlap. A professional maintenance visit typically includes inspection of applicable furnace components and system operation. Maintenance may also include appropriate cleaning, adjustments, testing, or other service depending on the equipment and its condition.
When is the best time to schedule furnace maintenance?
Before the heating season is a convenient time because the system can be inspected before colder weather arrives. However, maintenance can be performed at other times if your annual service has not yet been completed.
Do you maintain gas furnaces?
Yes. We provide maintenance and inspection for residential gas furnaces and evaluate applicable combustion, ignition, electrical, control, airflow, venting, and safety components.
Do you maintain electric furnaces?
Yes. We maintain electric furnaces and can inspect applicable heating elements, controls, electrical components, blower operation, thermostat operation, airflow, and other system components.
Do you maintain heat pumps?
Yes. Any Season Heating & Cooling provides heat pump maintenance in addition to furnace maintenance.
Do you maintain furnaces from brands other than Trane?
Yes. We maintain and repair all major residential furnace brands. Our service is not limited to Trane equipment.
Will furnace maintenance prevent every breakdown?
No. No legitimate HVAC contractor can guarantee that maintenance will prevent every future component failure. However, routine maintenance can identify some developing problems and help ensure that the system is operating properly at the time of service.
Can maintenance lower my heating bill?
Proper furnace operation, airflow, and equipment condition can affect energy use. Maintenance can address or identify certain conditions that negatively affect system performance, but the amount of energy savings varies from one home and system to another.
What happens if you find a problem during the furnace inspection?
If we identify a condition that requires additional repair or diagnosis, we explain what we found and discuss the available options before additional work is performed.
Can you repair my furnace during a maintenance visit?
If a repair is required, the next step depends on the problem, required parts, and circumstances. We provide furnace repair service and can explain the appropriate solution after the issue is identified.
Do you provide furnace maintenance in Park Ridge, Mount Prospect, and Arlington Heights?
Yes. Our service area includes Des Plaines, Park Ridge, Mount Prospect, Arlington Heights, Glenview, Niles, Prospect Heights, Rosemont, Elk Grove Village, Buffalo Grove, Palatine, Norridge, Wheeling, and nearby communities.
Schedule Furnace Maintenance & Inspection
Regular heating maintenance gives you an opportunity to have your furnace inspected before an unexpected problem leaves your home without heat.
Any Season Heating & Cooling provides professional furnace maintenance and furnace inspection for gas and electric furnaces, along with heat pump maintenance, throughout Des Plaines and surrounding northwest suburbs.
Any Season Heating & Cooling Inc.
894 Parkview Lane
Des Plaines, IL 60016
Call or Text: (847) 766-9654
24/7 Emergency Furnace & Heating Service
Follow Us on Social Media: Google Maps | Facebook | Twitter | LinkedIn | Facebook
Serving Des Plaines and the surrounding northwest suburban communities.
Schedule Your Furnace Maintenance & Inspection Today